AiM Smarty Cam HD Rev2.1 84 Degree Slave Kit 4M

AiM Smarty Cam HD Rev2.1 84 Degree Slave Kit 4M


Lead Time May Vary, Please Call.

SmartyCam HD Rev. 2.1, 84° FOV Slave kit, 4m

This kit was designed to work with your other AiM systems. This is not a standalone unit.

Smarty Cam HD has been designed for Motorsports with a single purpose: providing great videos that include all the technical information that will help you improve your performance.  All this in the most robust and reliable system ever.

In it’s new version, the electronics/mechanics have been further improved, and Smarty Cam HD is now even easier to manage.

Here some video shot with a Smarty Cam paired up with a Solo DL in the AAF SPEC E46.

Smarty Cam HD Rev. 2.1 Competitive Advantages:

  • Real time data overlay on videos
    • From GPS: Track map and vehicle position, as well as speed, lap and split times. From Aim loggers connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures and – in presence of additional sensors – also their values.  All information will be overlaid on videos in each single point on the track.
  • Race Studio 3 for video configuration and analysis
    • Smarty Cam HD uses the newest Race Studio 3, the powerful software which allows you to configure all the details of your videos and to get plenty of fun and information out of them.  You can configure your overlays in a virtually infinite variety of modes: add your logo and the track map, choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will truly be “yours” in all details, from the data to their graphic layouts.  The video of a whole session, once downloaded on your PC, can now be split into individual videos of each lap: so that you can simultaneously watch two of them and see where you were faster or slower. The same operation can be performed with any Smarty Cam HD video recorded at the same track.  You will be able to compare your best lap with your friends personal best!
  • Automatic start/stop
    • When your on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you need to worry about is turning on your camera.   Smarty Can HD is aware of that.  That is why it switches on/off automatically and starts/stops recording the same way.
  • No “wave effect” with the new CMOS sensor and improved video quality
    • Engine rumble causes vibrations, which are not a good thing for video recording.  Never again will you experience that seasick “wave effect” you get when watching videos recorded by generic cameras, when the car rolls at 7,000 RPM.  Smarty Cam HD has been designed for that environment and for those vibrations.  “Wave effect” is just a memory.
  • Proprietary lens designed for Motorsports
    • A lens specifically designed for Motorsports must be robust, be able to work when the engine rolls 100 times second, and have good resolution and brightness.  But above all a lens designed for Motorsports must reduce distortion, which is a typical problem of lenses used by generic action-cameras: objects placed at 30 foot distance look very far, making it impossible to accurately determine whether the track is straight or curved.  Smarty Cam HD’s telocentric lens with six elements reduces distortion to the minimum and will withstand track vibrations for years. 
  • Front mount color TFT display for in-car installation
    • On-board cameras are to be installed inside the car.  Where should the display be placed to check the correct position of the camera?  The Smarty Cam HD has a 128×128 pixel TFT color display on the front, not the rear – where general cameras place the viewfinder.
  • High-quality small size video files
    • HD cameras competition is focused on the highest pixel number. The result is that their video files are far too large, taking up too much memory.  Smarty Cam HD videos have the same quality as other HD cameras but their files are smaller because the H264 compression system parameters have been optimized to a perfect balance between video quality and file size.  You can choose among 3 video quality levels: one-hour recording takes 4GB (high quality), 2GB (normal quality) or 1.5GB (low).  Files are stored on SD cards: with current SD cards reaching 128GB capacity, you can record more that 30 hours of high quality videos without changing the SD card.
  • Designed to withstand extreme on-track working conditions
    • Frail things have a bad time on the track.  An on-board camera designed for Motorsports must guarantee great resistance against the extreme working conditions typical of track racing and against the most adverse weather, such as: strong and prolonged vibrations, storms, continuous rain, and extreme high and low temperatures.
  • Compact, handy and easy to install
    • It’s small size (87x63x49mm) and light weight (280g) make Smarty Cam HD easy to install inside your car or bike.


Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products